True Track Carts / Bogies
Designed for an automotive company to transport parts trolleys 200 meters away.
Self Tracking Bogies
Designed for an automotive company to transport parts trolleys 200 meters away.
Bike Engine Transfer Arrangement
Circular Vibratory Conveyor
Stainless Steel Mixing Tank
Foldable Light Pole
8 meter high, 300W, 200mm octagonal section at bottom & 80mm at top.
Squeezer 500Kg/hr
This was engineered for a potato chips making plant. When peel is being ground off the potatoes, water spray flushes peel to channel directing to WWTP. Before putting it to treatment plant peel is removed from water and then squeezed.
Cooking Kettle
Stainless Steel 316L For ketchup cooking in vacuum. Dimpled jacket on sidewall and bottom dished end for steam heating. 4 inch thick rock wool cladded by 2mm SS sheet. Specially designed Teflon Scraper having hand clicked attach and detach design ( no screw & spanner)
Beamless Road Tanker
Normally road takers are made to put on the standard 40 feet long vehicle’s 5 feet high chassis. Those 5 feet elevated tankers are prone to turnover. For lowering the Centre of Gravity, this 5mm thick tanker has been engineered eliminating the need of chassis beams. Clearance between the tanker and road is 500mm.
Music
Handling System for Potato Chip Slicer Head
Normally road takers are made to put on the standard 40 feet long vehicle’s 5 feet high chassis. Those 5 feet elevated tankers are prone to turnover. For lowering the Centre of Gravity, this 5mm thick tanker has been engineered eliminating the need of chassis beams. Clearance between the tanker and road is 500mm.
Music
Edible Oil Storage Tank
Stainless steel 304 shell 5mm, internal polish 220 & external 120 grit, Hot water dimpled jacket 3mm, 4 inch thick Rock wool insulation, conical bottom and top, , all connections extruded, cladding SS 304 2mm, equipped with two types of mechanical indicators.
Batter Mixer
This 170 litres mixing tank has been designed to prepare batter for wafers biscuits.
Mixing Tank 5000 Liter
Stainless Steel 316 steam jacketed, insulated Vessel. Bottom unsupported agitator held securely within drive’s bearings
Mixing Tank 5000 Liter Continuous Chocolate Melter (prototype)
Melting rate per square foot is 300kg/hour
Screw Press Squeezing Fruit
At a potato chip manufacturing plant, potatoes are peeled in a drum that rubs the potatoes with an abrasive surface in the presence of flushing water. The waste from these peelers (water and powdery peel) is sent to the waste water treatment plant but there, the peel causes excessive load so it must be removed beforehand. A drum sieve filter out the free water from the peel. At this stage, it is dripping wet and messy to transport. This screw press squeezes the peel to near dry state removing all excess water.
SEPARATOR for Liquid and Solids
Has been manufactured for a potato chips making factory where potato peel is required to be separated from flushing water.
Squeezer
This machine has been made for removing water from wet peel of potatoes at 300 kg/hr.
Wheat Flour Bowser 14 Tons
This machine has been made for removing water from wet peel of potatoes at 300 kg/hr.
Murree Tree Deck
A 20×20 feet deck supported on the trees approached by a bridge.
Murree Tree Deck
Constructed on live trees
Powder Mixer 1000 Kg / Blender
Designed and manufactured for mixing different spices, material SS304, hygienic finish, 18kw x 2.
